{"id":995,"date":"2026-09-08T08:20:52","date_gmt":"2026-09-08T08:20:52","guid":{"rendered":"https:\/\/isbmmolding.com\/what-does-isbm-stand-for-2\/"},"modified":"2026-09-08T08:20:52","modified_gmt":"2026-09-08T08:20:52","slug":"what-does-isbm-stand-for-2","status":"publish","type":"post","link":"https:\/\/isbmmolding.com\/ko\/what-does-isbm-stand-for-2\/","title":{"rendered":"What does ISBM stand for?"},"content":{"rendered":"
\n

Injection stretch blow moulding (ISBM) is a manufacturing process that converts plastic resin into finished hollow containers in a single, continuous sequence. Unlike processes that require a separately manufactured preform, one-step ISBM takes raw pellets and produces a finished bottle without intermediate handling or storage — making it the preferred choice for short runs, complex shapes, and applications where contamination control matters.<\/p>\n

What Happens Inside an ISBM Machine<\/h2>\n

At its core, ISBM merges two distinct plastics-forming technologies into one platform. First, molten resin — typically PET, PP, or PETG — is injected into a preform mould. The resulting thick-walled tube, known as a preform, is retained on the machine’s mandrel and transferred — still warm — to a blow station, where a stretch rod elongates it axially while high-pressure air expands it radially into the final bottle shape.<\/p>\n

The key physical event is biaxial molecular orientation. When PET is stretched in two directions simultaneously at the right temperature, the polymer chains align in both axes. This alignment gives PET bottles their glass-like clarity, their resistance to carbonation pressure, and their ability to be blow-moulded down to wall thicknesses of under 0.3 mm without pinholing.<\/p>\n

\"ISBM<\/p>\n

Overview of ISBM machine configurations — 3-station, 4-station, and 6-station designs handle different volume and complexity requirements.<\/p>\n

The Three Fundamental Stations<\/h2>\n

Every ISBM machine performs the same three core operations on a rotating table. Each position runs simultaneously — so while one set of preforms is being injected, another is being conditioned, and a third is being blown.<\/p>\n\n\n\n\n\n\n\n
Station<\/th>\nOperation<\/th>\nKey Control Variable<\/th>\n<\/tr>\n<\/thead>\n
\uc8fc\uc785<\/td>\nResin injected into preform cavity, cooled to ejection temperature<\/td>\nInjection pressure, melt temperature, pack time<\/td>\n<\/tr>\n
Stretch-Blow<\/td>\nStretch rod extends; high-pressure air expands preform against blow mould<\/td>\nRod speed, pre-blow delay, blow pressure (25–40 bar)<\/td>\n<\/tr>\n
Ejection<\/td>\nMould opens; finished bottle removed by conveyor or transfer arm<\/td>\nMould cooling temperature, ejection timing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Four-station machines add a dedicated conditioning station between injection and blow. This position allows fine-tuning of the preform’s axial temperature profile using infrared heaters — critical for complex shoulder shapes or asymmetric sidewall thickness. Six-station designs go further, adding post-blow cooling to enable higher cycle speeds without dimensional instability at ejection.<\/p>\n

One-Step ISBM vs Two-Step Reheat Blow<\/h2>\n

ISBM exists in two process formats, and the terminology is often confused. The distinction is where the preform comes from:<\/p>\n